ENG-16
A 52-series drop-in gelatin filter holder with a
glass filter is installed as standard equipment on
each lens. The drop-in filter is used fitted with a
gelatin filter (sold separately).
13. Drop-In Filters
14mm
14mm
47mm
47mm
<Removing and Installing the Drop-in Filter>
To remove the drop-in filter, press in the left and
right lock buttons and pull the filter holder
straight up out of the slot.
To install the drop-in filter, push the filter holder
straight down into the slot until it clicks into place.
●
The filter holder can be installed facing either
forwards or backwards.
Trim the gelatin filter as shown in the figure
above.
Lift up the holder’s retaining plate.
Mount the gelatin filter in the holder.
Return the retaining plate to its closed
position.
<Fitting the Gelatin Filter>
The Drop-In Screw-Type Filter Holder 52 and Drop-
In Circular Polarizing Filter PL-C52 are also
available (sold separately).
Because the lens optics are designed to include a
glass filter, you must always install the filter holder,
even if no gelatin filter is fitted.
