Canon EF 16-35mm f/2.8L II USM, Инструкция по эксплуатации

Страница: 7 / 14

ENG-6
See your camera’s instructions for details on
mounting and detaching the lens.
● ●
After detaching the lens, place the lens with
the rear end up to prevent the lens surface and
contacts from getting scratched.
● ●
If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
● ●
If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
● ●
Attach the lens cap and dust cap when
disconnecting the lens. When attaching the
dust cap, align the lens mount index with the

index of the dust cap and rotate in a clockwise
direction as shown in the illustration. Follow the
reverse procedure to detach it.
The lens mount has a rubber ring for enhanced
dust- and water-resistance. The rubber ring may
cause slight abrasions around the camera’s lens
mount, but this will not cause any problems. If the
rubber ring becomes worn, it is replaceable by a
Canon Service Center at a cost.
1. Mounting and Detaching the Lens