8
8
8-2
8-2
Adjustment > Overview
Adjustment > Overview
Overview
The following is adjustment items list.
Item
At main parts replacement
As needed
basis
Reference
DADF (including when it is
engaged or disengaged)
Scanner unit
Original width
volume
Post-separation sensor 1/2/3
Registration sensor
Lead sensor 1
Delivery sensor
-
-
Preparation or Creation of Test Chart
*1
1
Angle Restriction Release (Opening Angle at 90 deg)
2
Sensor Output Adjustment
3
1
Tray Width Adjustment
4
1
Tilt Adjustment
5
Height Adjustment
6
Right Angle Adjustment
7
Registration Roller Wheel Skew Adjustment
Yes
Stream Reading Adjustment
Yes
Side Registration Adjustment
8
Leading Edge Registration Adjustment
9
Magnification Adjustment
10
White Level Adjustment
11
Hinge Pressure Adjustment
Yes
Processing after Scanner Unit Replacement
1
*1: [Preparation or creation of test chart] is required for [Right angle adjustment], [Registration roller wheel skew adjustment], [Side registration adjustment],
[Leading edge registration adjustment] and [Magnification adjustment].
Refer to the reader’s manual for the operation when the reader controller PCB is replaced (or EEPROM is cleared).
MEMO:
The number indicates step for each work.
Содержание Duplex Color B1
