Canon DP-V2730 Скачать руководство пользователя страница 95

Страница: 95 / 106

Error Messages

Message

Description and Action

Hardware error

Backlight error.

Disconnect the power cord, reconnect it, and then
turn on the power.
If the message persists, contact Canon Customer
Center.

Fan error.

Panel error.

I/F error.

Audio I/F error.

System error.

Input signal

No Signal

Displayed when there is no video signal input.

Unsupported

Unsupported video signal is input. Check the
supported signal format (

77).

Operation

Invalid operation.

Operation is disabled. Check the setting items.

"Protect Settings" is on.

To use the OSD menu, move the selection frame
to [Protect] and press the jog dial for approximately
3 seconds.

"CDL/User LUT Bypass" is on.

When [CDL/User LUT] [Bypass] is turned [On],
you cannot adjust [Power], [Saturation], [Offset], or
[Slope].

Invalid Password.

Enter the correct password.

No license.

This function cannot be used as the license file has
not been applied. Refer to the Canon website for
detailed information.

USB memory

USB memory is not connected.

Correctly connect the USB memory to the USB port
of this main unit.

Unsupported USB memory.

Check the USB memory format and make sure it is
not protected.

Firmware Update

No update file.

Firmware update files are not saved on USB memory
or other media.

Failed to read update file.

There is an error in the file. Check the file.

The firmware/license has been already updated.

This is the file that is updated on the video display.

Содержание DP-V2730











































































































Результаты поиска

Содержание DP-V2730

Отзывы:

Похожие инструкции для DP-V2730

Бренды по названию

Популярные бренды

Canon DP-V2730, Руководство по эксплуатации

Результаты поиска

Содержание DP-V2730

Отзывы:

Похожие инструкции для DP-V2730

Бренды по названию

Популярные бренды