Canon DP-V2730, Руководство по эксплуатации

Страница: 36 / 106

OSD Menu
36
Channel Settings
This menu is used for input related settings. Select the [Select Channel] and choose a channel number from CH1 to
CH20. Finally define the parameter of each of the [Channel Settings].

"Supported Signal Format" ( 77)
Sub Menu Setting Options
Select Channel CH1 to CH20 Display the channel number. In addition, you can assign each content of
[Channel Settings] to each channel (
14).
• It may take 3 seconds when switching channels.
Input Configuration 12-3G/HD-SDI
HD/SD-SDI
HDMI
Multi View
— (Not set) Select the input. Factory default depend on the channel ( 15).
When [Multi View] is selected, the signal to be input to each of the screens
can be selected from an SDI signal or an HDMI signal. SD-SDI signals
cannot be displayed.
Select Input Signal Automatic
Quad Input
Dual Input A,B
Dual Input C,D
Single Input A
Single Input B
Single Input C
Single Input D Sets the signal display method.
[Automatic]: The display method is automatically determined to match the
input signal.
[Quad Input]: Four input signals (Input A to Input D terminals) are
displayed.
[Dual Input A,B]: Two input signals (Input A terminal and Input B terminal)
are displayed.
[Dual Input C,D]: Two input signals (Input C terminal and Input D terminal)
are displayed.
[Single Input A], [Single Input B], [Single Input C], [Single Input D]: One
input signal (any of Input A to Input D) is displayed.
• Settings that can be set differ according to the input signal.
- [HDMI]: Fixed to [Automatic].
-
[HD/SD-SDI]: Only [Single Input A] to [Single Input D] can be selected.