Canon DIGITAL IXUS 50 Скачать руководство пользователя страница 73

Страница: 73 / 196

Shooting

Shooting Close-Ups/ Infinity Shots

To cancel the macro/infinity mode

Press the

button to remove

from the display.

• Use the LCD monitor to compose close-ups in macro mode since

images composed with the viewfinder may be off-center (p. 44).

• The exposure may not be optimal when the flash is used in macro mode

in the range of 3 to 30 cm (1.2 in. to 1.0 ft.).

See

Photo Tips and Information

(p. 181).

Macro

Use this mode to record subjects in the range of 3 to 50
cm (1.2 in. to 1.6 ft.) from the end of the lens at the
maximum wide angle setting and in the range of 30 to 50
cm (1.0 to 1.6 ft.) at the maximum telephoto setting.

Infinity

Use this mode to record subjects that are 3 m (9.8 ft.)
or more from the end of the lens.

–

Setting available

Can be selected for the first image only

Press the

button to select

the macro/infinity mode.

The selected macro/infinity mode appears
on the LCD monitor.

Shooting Mode

Содержание DIGITAL IXUS 50





































































































































































































Результаты поиска

Содержание DIGITAL IXUS 50

Отзывы:

Бренды по названию

Популярные бренды

Canon DIGITAL IXUS 50, Руководство пользователя

Результаты поиска

Содержание DIGITAL IXUS 50

Отзывы:

Бренды по названию

Популярные бренды