Canon DIGITAL IXUS 50 Скачать руководство пользователя страница 24

Страница: 24 / 196

• Please watch the loading slot area carefully as you insert and

remove the battery pack.

• Do not turn off the power or open the SD card slot/battery cover

while the indicator blinks green. The camera is writing, reading,
erasing or transmitting an image to or from the SD card.

• Remove the battery pack when the camera is not in use. Please

note, however, that the date, time and other camera settings may be
lost if the battery pack has been removed for more than three weeks.

Please use an AC Adapter Kit ACK-DC10 (sold separately) for
extended use of the camera (p. 169).

Battery Pack Charge

The following icons and messages will display when the battery pack charge
is low.

See

Battery Capacity (Battery Pack NB-4L (Fully charged))

(p. 177).

Battery pack charge is low. Recharge it as soon as possible
before it is required for an extended period.
When the LCD monitor is off, this icon will display when you
press any button other than the power or

(Print/Share)

button.

Change the
battery pack

Battery charge is insufficient to operate the camera. Replace
the battery pack immediately.

Содержание DIGITAL IXUS 50





































































































































































































Результаты поиска

Содержание DIGITAL IXUS 50

Отзывы:

Бренды по названию

Популярные бренды

Canon DIGITAL IXUS 50, Руководство пользователя

Результаты поиска

Содержание DIGITAL IXUS 50

Отзывы:

Бренды по названию

Популярные бренды