manualshive.com logo in svg

Canon D500 Series, Руководство по обслуживанию, Страница: 117 / 255

Поделиться
Скачать
Canon D500 Series Скачать руководство пользователя страница 117

4

4

4-54

4-54

Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Unit and Reader Unit

Disassembly/Assembly > Document Exposure/Feeder System > Removing the SADF Unit and Reader Unit

4) Remove the SADF unit and reader unit [1].
•  2 claws [2]

Caution:
When disassembling/assembling the SADF unit and reader unit, be careful not to 
damage the flat cables and harnesses with [A] part.
When assembling, be sure to put the flat cables and harnesses through the [A] part 
before installing the SADF unit and reader unit.

[A]

 

F-4-107

[1]

x2

[2]

[2]

F-4-108

Caution:
When mounting the SADF unit and reader unit, fix the 2 hinge arm claws [1] to the 2 
latches [2] of the reader unit.

[2]

[1]

[2]

[1]

 

F-4-109

Содержание D500 Series
































































































































































































































































Отзывы:

Нет отзывов