Canon CXDI-50G, Руководство пользователя

Страница: 4 / 36

(2)
Safety Information
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The CXDI-50G is intended for use in the electromagnetic environment specified below.
The user of the CXDI-50G should assure that it is used in such an environment.
Emission Test Compliance Electromagnetic Environment – Guidance
RF emissions
CISPR 11 GROUP 1 The CXDI-50G uses RF energy only for its internal func-
tion. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electromagnetic
equipment.
RF emissions
CISPR 11 Class A The CXDI-50G is suitable for use in all establishments
other than domestic and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2 Not Applica-
ble
Voltage fluctuations/
flicker emissions
IEC 61000-3-3 Complies
Immunity Test
IEC 60601
Test Level
Compliance
Level
Electromagnetic Environment – Guidance
Electrostatic dis-
charge (ESD)
IEC 61000-4-2 ±(2, 4, 6) kV
contact
±(2, 4, 8) kV
air
±(2, 4, 6) kV
contact
±(2, 4, 8) kV
air
Floors should be wood, concrete or
ceramic tile. If floors are covered with syn-
thetic material, the relative humidity
should be at least 30%.
Electrical fast tran-
sient/burst
IEC 61000-4-5 ±2 kV for
power supply
lines
±1 kV for
input/output
lines
±2 kV for
power supply
lines
±1 kV for
input/output
lines
Mains power quality should be that of a
typical commercial or hospital environ-
ment.
Surge
IEC 61000-4-5 ±1 kV differ-
ential mode
±2 kV com-
mon mode
±1 kV differ-
ential mode
±2 kV com-
mon mode
Mains power quality should be that of a
typical commercial or hospital environ-
ment.