manualshive.com logo in svg

Canon CXDI-50G, Руководство пользователя

Поделиться
Скачать
Canon CXDI-50G Скачать руководство пользователя страница 22

– 8 –

5. Inspection and Maintenance

5.1 Inspection

In order to ensure that the instrument is used safely and normally, please be sure to inspect 
the instrument before use.
If any problem is found during the inspection, please take measures indicated in this chap-
ter.
If problem still cannot be corrected, please contact Canon representative or distributor.

It is recommended that a record of the inspection by kept by making copies of the check 
lists in this section, or making a separate check list.

5.1.1 Daily Inspection

5.1.1.1 Before Turning ON the Power

 WARNING

The instrument must be repaired by a qualified engineer only.
If it is not repaired properly, it may cause fire, electric shock, or accident.

 CAUTION

For safety reasons, be sure to inspect the instrument before using it.

 WARNING

For safety reasons, be sure to turn OFF the power of each instru-
ment when the following inspections are going to be performed.
Otherwise, it may result in electric shock.

WARNING

Clean the plug of the power cable periodically by unplugging it 
from the AC outlet and removing dust or dirt from the plug, its 
periphery and AC outlet with a dry cloth. If the cable is kept 
plugged in for a long time in a dusty, humid or sooty place, dust 
around the plug will attract moisture, and this could cause insula-
tion failure which could result in a fire.

Inspection

Result

Remedy

Date

/

Date

/

Date

/

Check that cables are not dam-
aged or cover of cables is not 
torn.

Good/Bad

Good/Bad

Good/Bad

Contact Canon or distrib-
utor if there is any prob-
lem.

Check that the cables are prop-
erly connected to the connectors 
and the AC outlet.

Good/Bad

Good/Bad

Good/Bad

Connect the cables prop-
erly.

Check that the cover or parts are 
not damaged and not loose.

Good/Bad

Good/Bad

Good/Bad

Contact Canon or distrib-
utor if there is any prob-
lem.

! 

! 

! 

! 

Содержание CXDI-50G





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды