Canon CRL3124N Скачать руководство пользователя страница 447

Страница: 447 / 468

447

Preventing Injury or Equipment Damage

• Do not leave equipment inside a car under the hot sun or near a heat source. The

equipment may become hot and cause skin burns.

• Do not carry the camera around while it is attached to a tripod. Doing so may cause

injury. Also make sure the tripod is sturdy enough to support the camera and lens.

• Do not leave a lens or lens-attached camera under the sun without the lens cap

attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.

• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap

heat within and cause the casing to deform or catch fire.

• If you drop the camera in water or if water or metal fragments enter inside the camera,

promptly remove the battery pack and back-up battery. This is to prevent fire and

electrical shock.

• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so

may cause battery leakage or a shorter battery life. The battery pack or back-up

battery can also become hot and cause skin burns.

• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.

Doing so may cause fire or a health hazard.

If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.

Содержание CRL3124N





















































































































































































































































































































































































































































































Результаты поиска

Содержание CRL3124N

Отзывы:

Бренды по названию

Популярные бренды

Canon CRL3124N, Инструкция по эксплуатации

Результаты поиска

Содержание CRL3124N

Отзывы:

Бренды по названию

Популярные бренды