Easter : Bunny Egg Holder : Assembly Instructions
©
Canon Inc.
©
Taka Taka
Assembling the ribbon
Assembling the lid
Wrap this part around a round
pencil or other such cylinder to make
it assume a curve.
Glue the rear sides of the dots first.
Glue the ribbon to the Easter Bunny.
Assemble three units of part 3-1.
Glue the rear side of part 3-3.
Glue the bottom surface first.
Glue part 3-4 into place after inserting
parts 3-1 into part 3-2.
The lid is complete!
Assembling the egg holders (three in all)
The egg holders differ in color only.
Each is assembled in the same way.
Apply a curve to this
piece in the same way
as with the ribbon, then
glue its ends together.
Glue each glue tab to
the interior of the stand,
one tab at a time.
The egg stand
is complete!
Assembling the chicks (three in all)
Although the shapes and illustrations of
each chick differ slightly,
each one is assembled in the same way.
