Canon CR-2 AF Скачать руководство пользователя страница 8

8

2 Safety

Notes on Using This Product 

Digital camera 

• 

The attached digital camera is designed for this product. The specifications differ from 
commercially available Canon digital cameras. Use only for observing and taking photographs of 
peoples’ eyes. Do not detach the digital camera from the main unit to use separately. Otherwise, 
failure of this product may result.

• 

If any problems occur or repairs are needed with this product’s digital camera, contact your sales 
representative or local Canon dealer.

Before use 

• 

Inspect this product daily. Make sure that no foreign matter is present that can affect image 
readings or diagnoses. 

• 

Check and clean the objective lens before taking an image. Any stains or scratches on the 
objective lens will appear as white spots. 

• 

Sudden heating of a room during winter or in cold regions may cause condensation to form on 
the objective lens or on optical parts inside this product. In this case, wait until condensation 
disappears before taking images. 

• 

Do not touch the lens of the retinal camera or the mirror of the digital camera when attaching and 
detaching the digital camera from the retinal camera. If any dirt, fingerprints, dust, or other foreign 
objects are on the lens or mirror, you will not be able to take a good image.

After use 

• 

After using this product, turn off the power, cover the objective lens with the objective lens cap to 
protect it from dust, and place the dust cover over this product. You cannot take good images if 
the objective lens is dusty. 

• 

If the digital camera is detached and left unattached, dirt and dust may enter the retinal camera 
and the digital camera. Be sure to always attach the caps to their respective mounts.

Cleaning and disinfection 

• 

Do not allow the blower to touch the lens. 

• 

Do not wipe or rub the lens if there is dirt or dust on it. Doing so could scratch the lens. 

• 

Do not wipe the lens with disinfectant ethanol, eyeglass cleaner, or silicone-coated paper. Doing 
so could corrode the surface of the lens or leave streaks. 

• 

Do not clean the outside of this product with a lens cleaner. Doing so could damage the outside of 
this product. 

• 

Never use alcohol, benzine, thinner, or other solvents to clean the outside of this product. Doing so 
damages the outside of this product. 

• 

Never use disinfectant ethanol to clean the outside of this product, with the except of the forehead 
rest and the chin rest. Doing so damages the outside of this product. 

• 

If the chin rest paper is not being used, disinfect the chin rest for each patient in the same manner 
as you do for the forehead rest.

• 

For information about lens cleaning paper, lens cleaner, and blowers, contact your sales 
representative or local Canon dealer.

EU_BT8-1756-EN01_CR-2_AF.indb   8

4/1/2020   1:28:11 PM

Содержание CR-2 AF

















Отзывы: