6
2 Safety
Ensure that the entire system conforms to IEC 60601-1-1.
Use the equipment conforming to IEC 60601-1 in the patient
environment.
Use the computer, monitor, and other equipment that conform to the system
standard IEC 60601-1 or IEC 60950-1 for this product. Be sure that the entire
system conforms to IEC 60601-1-1. Be sure to also use an isolation transformer
conforming to IEC 60601-1 when a computer or monitor conforming to IEC 60950-1
is used.
Otherwise, electric shock may occur. For details, please contact your sales
representative or local Canon dealer.
Make sure that the patient’s name, ID, birth date, and sex
match those that are entered for the patient.
If the entered information is incorrect, patients may be mixed up and misdiagnosed,
which may result in physical injury to the patient.
Keep the forehead rest and chin rest clean.
To prevent the risk of infection, wipe the forehead rest with disinfectant ethanol for
each patient. To ensure cleanliness, replace the chin rest paper for each patient.
If the chin rest paper is not being used, be sure to disinfect the chin rest for each
patient.
If the chin rest paper is not being used, be sure to disinfect the chin rest for each
patient.
For details on how to disinfect, consult a specialist. The forehead rest may be
corroded if a disinfectant other than those above is used.
Slowly move the main unit toward the patient’s eye when
taking an image.
When adjusting the position of the main unit in the front-back direction, slowly bring
the main unit closer to the patient while looking at the patient’s eye from the side.
The patient’s eye may be injured if the objective lens makes contact with it.
Check the image before using this product.
Before using this product, be sure to take a test image to ensure that there is no
foreign matter present that can affect image readings or diagnosis.
Be sure to turn off the power when not in use.
For safety reasons, be sure to turn off the power of all the devices when this product
is not being used.
Also, unplug the power plug from the AC outlet and put on the cover when this
product is not going to be used for a long time.
Otherwise, dust or any foreign matter may accumulate and result in fire.
Do not touch the main unit while it is moving.
The main unit moves to the center position when this product main unit is turned on
or an examination is finished with the control software. Do not touch the main unit
while it is moving.
Before packing this product, return the main unit and chin
rest to their lowest positions.
Lower the main unit and chin rest to the bottom. To automatically lower them, turn
on the power while holding down the SET button.
EU_BT8-1756-EN01_CR-2_AF.indb 6
4/1/2020 1:28:11 PM
