Canon ColorPass-Z7400, Руководство по настройке

Страница: 57 / 210

3
3-9 About Setup
The first time you perform Setup, you must use the ColorPASS Control Panel.
Configure, at a minimum, Server Setup, Network Setup, and Printer Setup, in that
sequence. After the initial Setup, you can change Setup options from the Control Panel
(see
“ColorPASS Control Panel” on page 4-4) or Command WorkStation (see
“Accessing Setup” on page 5-1). Most Setup options can be set using any of these
methods.
N
OTE
:
Configuring and monitoring the Windows XP Embedded functions on the
ColorPASS require the ACI. For more information, contact your authorized
service/support technician.
If you do not configure the remaining Setups, the ColorPASS uses default settings. You
need to make settings appropriate for the printing environment at your site.
Local Setup from the ColorPASS
You can also perform Setup locally at the ColorPASS, using Setup Fiery from the
FieryBar menu. Some of the settings you specify in Setup configure the Server process
(such as print job defaults), while some configure the Windows XP Embedded
Workstation environment (such as system date and time). Depending on the settings
you change in Setup, you must restart the Server software (by choosing Restart Fiery
from the FieryBar menu) or Windows XP Embedded before your changes take effect.
Setup options for local Setup are divided into three groups:
General Setup System settings, passwords, and Job Log options
Network Setup All the active network system settings that will transmit print
jobs to the ColorPASS and available services
Printer Setup ColorPASS print connections to be made available to users,
and PostScript, and color defaults for jobs