Canon ColorPass-Z7400, Руководство по настройке

Страница: 110 / 210

4
4-46 Performing Setup from the Control Panel
Color Setup options
Color Setup allows you to set defaults the ColorPASS uses to control color output.
Mac OS and Windows users who use the printer drivers provided on the User
Software CD can override most of these defaults on a job-by-job basis. However, users
printing from UNIX or DOS command lines cannot override defaults from their
applications. Therefore, you must set defaults in Color Setup.
The preferred method for setting color defaults is to use Color Setup, part of
ColorWise Pro Tools. The color options are described in this section for your
reference. For more information about these defaults, see the
Printing Guide and
Color Guide .
N
OTE
:
In addition to the defaults described in this section, additional settings are
available to Mac OS and Windows users from the printer drivers.
T
O ACCESS
C
OLOR
S
ETUP OPTIONS
In the list of options that follows, default values, where applicable, appear in
square brackets.
RGB Source Profile
EFIRGB/sRGB (PC)/Apple Standard/None [EFIRGB]
The RGB source is the color space used to control color for conversion from monitor
to printed output. EFIRGB is based on the reference points used in the creation of the
ColorPASS software. sRGB is based on an average of a large number of PC monitors.
Apple Standard is the standard reference point for Apple’s ColorSync software.
1. In the main Setup menu, choose Color Setup.
2. Enter the options appropriate to the printing requirements at the site.
3. When you have finished, save changes.
PS Setup
Color Setup
Job Log Setup
Change Password
Setup