Canon Color imageRUNNER C3380 Series Скачать руководство пользователя страница 497

Страница: 497 / 550

List of Error Messages

8-81

roub

leshooting

# 009

Cause 1

There is no paper.

Remedy

Load paper. (See "Paper Drawers," on p. 7-2.)

Cause 2

The paper drawer is not inserted correctly into the machine.

Remedy

Insert the paper drawer properly. (See "Paper Drawers," on p. 7-2.)

# 037

Cause

Documents could not be received because there was insufficient memory
available.

Remedy

Erase unwanted documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 2, " Introduction to the
Mail Box Functions," in the

Copying and Mail Box Guide

, and Chapter 6,

"Receiving Documents," in the

Sending and Facsimile Guide

# 099

Cause

Copying/printing was interrupted.

Remedy

Try copying/printing again.

# 701

Cause 1

The specified Department ID does not exist, or the password has changed.

Remedy

Enter the correct Department ID or password using

(numeric keys) on

the control panel, and try again.

Cause 2

The Department ID or password was changed while the machine was
processing a job, or <Allow Printer Jobs with Unknown IDs> is set to 'Off'.

Remedy

Contact your System Manager.

# 703

Cause

The hard disk is full, and no more images can be scanned.

Remedy 1 Wait a few moments, and try scanning again after the other send jobs are

complete.

Remedy 2 Erase documents stored in inboxes. If the machine still does not operate

normally, turn the main power OFF, and then back ON again.

Содержание Color imageRUNNER C3380 Series







































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Color imageRUNNER C3380 Series

Отзывы:

Бренды по названию

Популярные бренды

Canon Color imageRUNNER C3380 Series, Справочное руководство

Результаты поиска

Содержание Color imageRUNNER C3380 Series

Отзывы:

Бренды по названию

Популярные бренды