Canon Color imageCLASS X LBP1127C, Начало работы, Страница: 22 / 48

22
En
Appendix
• Do not touch the toner cartridge memory
( ) or the electrical contacts ( ). To avoid
scratching the surface of the drum inside the
machine or exposing it to light, do not open
the drum protective shutter ( ).
c
a
b
Bottom View
•
Except when necessary, do not take out the
toner cartridge from the packing material or
from this machine.
•
The toner cartridge is a magnetic product. Do
not move it close to products susceptible to
magnetism including floppy disks and disk
drives. Doing so may result in data corruption.
Storing the toner cartridge
• Store in the following environment to ensure
safe and satisfactory use.
Storage temperature range: 32 to 95°F (0 to 35°C)
Storage humidity range: 35 to 85% RH (relative
humidity/no condensation)*
• Store without opening until the toner
cartridge is to be used.
• When removing the toner cartridge from this
machine for storage, place the removed toner
cartridge in the original packing material.
• When storing the toner cartridge, do not store
it upright or upside down. The toner will
solidify and may not return to its original
condition even if it is shaken.
* Even within the storable humidity range,
water droplets (condensation) may develop
inside the toner cartridge if there is a
difference of temperature inside and outside
the toner cartridge. Condensation will
adversely affect the print quality of toner
cartridges.
Do not store the toner cartridge in the
following locations
• Locations exposed to open flames
• Locations exposed to direct sunlight or bright
light for five minutes or more
• Locations exposed to excessive salty air
• Locations where there are corrosive gases (i.e.
aerosol sprays and ammonia)
• Locations subject to high temperature and
high humidity
• Locations subject to dramatic changes in
temperature and humidity where
condensation may easily occur
• Locations with a large amount of dust
• Locations within the reach of children
Be careful of counterfeit toner cartridges
• Please be aware that there are counterfeit
Canon toner cartridges in the marketplace.
Use of counterfeit toner cartridge may result in
poor print quality or machine performance.
Canon is not responsible for any malfunction,
accident or damage caused by the use of
counterfeit toner cartridge.
For more information, see global.canon/ctc.
Availability period of repairing parts and toner
cartridges and the like
•
The repairing parts and toner cartridges and
the like for the machine will be available for at
least seven (7) years after production of this
machine model has been discontinued.
CAUTION
• The inside of the machine has high-
temperature and high-voltage components.
Touching these components may result in
burns. Do not touch any part of the machine
that is not indicated in the manual.
• When loading paper or removing jammed
paper, be careful not to cut your hands with
the edges of the paper.
Consumables
WARNING
•
Do not dispose of used toner cartridges or the
like in open flames. Also, do not store toner
cartridges or paper in a location exposed to
open flames. This may cause the toner to
ignite, and result in burns or fire.
•
If you accidentally spill or scatter toner,
carefully gather the toner particles together or
wipe them up with a soft, damp cloth in a way
that prevents inhalation. Never use a vacuum
cleaner that does not have safeguards against
dust explosions to clean up spilled toner.
Doing so may cause a malfunction in the
vacuum cleaner, or result in a dust explosion
due to static discharge.
CAUTION
• Use caution not to inhale any toner. If you
should inhale toner, consult a physician
immediately.
• Use caution so that toner does not get into
your eyes or mouth. If toner should get into
your eyes or mouth, immediately wash with
cold water and consult a physician.
• Use caution so that toner does not come into
contact with your skin. If it should, wash with
soap and cold water. If there is any irritation on
your skin, consult a physician immediately.
• Keep the toner cartridges and other
consumables out of the reach of small
children. If toner is ingested, consult a
physician or poison control center
immediately.
• Do not disassemble or modify the toner
cartridge or the like. Doing so may cause the
toner to scatter.
• When removing the sealing tape from the
toner cartridge, pull it out completely but
without using excessive force. Doing otherwise
may cause the toner to scatter.
IMPORTANT
Handling the toner cartridge
•
Be sure to hold the toner cartridge using the
handle.
Toner cartridge packing materials
• Save the packing materials for the toner
cartridge. They are required when transporting
this machine.
• The packing materials may be changed in
form or placement, or may be added or
removed without notice.
• After you pull out the sealing tape from the
toner cartridge, dispose of it in accordance
with the applicable local regulations.
When disposing of a used toner cartridge or
the like
• When discarding a toner cartridge or the like,
place it in the original packing material to
prevent toner from scattering from inside, and
dispose of it in accordance with the applicable
local regulations.
Notice
Product Name
Safety regulations require the product's name to
be registered. In some regions where this product
is sold, the following name(s) in parentheses ( ) may
be registered instead.
imageCLASS X LBP1127C (F176100)
FCC (Federal Communications Commission)
Users in the U.S.A.
Laser Beam Printer, Model F176100
Contains Transmitter Module FCC ID: VPYLB1KA
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
[NOTE]
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.