Canon Color imageCLASS MF8170c, Инструкция по факсимиле

Страница: 36 / 98

Sending Methods 4-2
S
end
ing
F
a
x
e
s
4
NOTE
You can register a new fax job while the machine is waiting to redial the recipient's
number automatically. For details on how to set the machine to redial automatically, see
"Automatic Redialing," on p. 4-9. You can store up to 20 fax jobs or approximately 256
pages in the memory.*
* Based on the condition that the other party sends the fax by the Color imageCLASS
MF8170c with Canon Fax Standard Chart No. 1, standard mode. The maximum
number of pages that the machine's memory can store differs depending on the other
party's machine.
1
Place the document on the platen glass or load it in the ADF
➞
press [FAX].
For details on the types of documents you can fax, their requirements, and how to
place or load documents, see Chapter 3, "Document Handling," in the
Basic Guide .
2
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the fax resolution. (See "Adjusting the Image Quality
(Fax Resolution)," on p. 4-5.)
•
Press [Exposure] to select the scan density. (See "Adjusting the Exposure (Scan
Density)," on p. 4-5.)
3
Dial the recipient's fax/telephone number.
For details on the different dialing methods, see "Dialing Methods," on p. 4-6.
4
Press [B&W Start].
If you are using the ADF, the fax will be transmitted automatically.
If you are using the platen glass, you will be prompted when the page has been
scanned. Place the next page (for a multipage document)
➞
press [B&W Start]. To
start sending, after all the pages have been scanned, press [Set].
NOTE
To cancel memory sending, press [Stop/Reset].
You can also cancel sending using [Status Monitor]. (See Chapter 7, "System Monitor," in
the
Basic Guide .)
Manual Sending
Use manual sending when you want to talk to the recipient before sending a
document, or if the recipient does not have a fax machine that can receive
automatically.
Facsimile Guide.book 2 ページ ２００４年８月４日 水曜日 午後５時１分