Canon Color Image Reader-F1, Руководство по обслуживанию

Страница: 82 / 111

5
5
5-11
5-11
Adjustment > Adjustment Method (ADF) > Adj img pstn in DADF mode:horz scan
Adjustment > Adjustment Method (ADF) > Adj img pstn in DADF mode:horz scan
Scan position auto adj in DADF mode
1) Start service mode.
2) On the Service Mode screen, touch the following notations in sequence to bring up the
Adjustment screen:
(LV.1) COPIER > FUNCTION > INSTALL
3) Press [STRD-POS] to highlight.
4) Touch [OK].
A press on [OK] will cause the scanner to start a scan; in several seconds,the machine
will end auto adjustment of the read position and indicate 'OK'.
CAUTION:
If the machine fails auto adjustment and indicates 'NG', go through the following:
(1) Clean the white roller of the ADF and the stream reading glass of the host machine;
then, execute auto adjustment once again.
(2)If the auto adjustment operation still fails, start service mode, and make adjustments
manually:
(LV.1) COPIER>ADJUST>ADJ-XY>STRD-POS
Adj img pstn in DADF mode:horz scan
1) Place the test chart in the ADF, and make a copy.
2) Compare the copy against the Test Chart for the horizontal registration; as necessary,
make the following adjustments:
3) On the Service Mode screen, touch the following notations to bring up the Adjustment
screen:
(LV.1) COPIER > ADJUST > ADJ-XY
4) Press [ADJ-Y-DF] to highlight.
• if the image is displaced to the rear, increase the setting.
• if the image is displaced to the front, decrease the setting.
unit of adjustment: 0.1 mm
Feed direction Feed direction
A
A
Image rear side of
test chart
Rear side of
printed image
Rear side of
printed image
Image rear side of
test chart
< If the image is displaced toward rear > < If the image is displaced toward front >
F-5-14