Canon CN7x17, Руководство по эксплуатации

Страница: 41 / 122

E3
1
Attach the lens to the camera tightly so that both mounting
surfaces are in complete contact.
The mounting method differs depending on the lens
mounts. Refer to the operation manual for the respective
camera for the detailed information.
If the rod interferes with the lens body or drive unit when
mounting the lens, remove the rod and then mount the
lens.
2
Secure the lens holder on the lens support using the
clamping screw supplied with the lens support.
3
Fix the lens support to the rods using lens support fixing
screws.
2 HOW TO MOUNT
2-1. MOUNT THE LENS ON THE CAMERA
2 HOW TO MOUNT
Lens
support
CAUTION
When using a Φ19 rod, attach the supplied
attachment holder to the lens holder in advance.
Rods
Lens support fixing screws
Screw supplied with the
lens support
Before mounting the lens on the camera, make sure that the power of camera and the power of supply
equipment are turned off.
For PL mount, read the following instructions before mounting the lens.
The PL mount supports /i communication, so make sure that the camera is set to “ /i ” . Do not mount the lens if the
camera is set to a mount communication mode other than /i. Doing so could result in malfunction.
Before mounting the lens on the camera, make sure that the power of camera and the power of supply
equipment are turned off.