Canon BW PCL PRINTER KIT-J1, Руководство по обслуживанию

Страница: 22 / 28

Chapter 2
2-2
F-2-3
4) If a Super G3 Fax Board-T1 is found, disconnect the connector [1] of the IP-modem cable.
If an optional Super G3 Fax Board-T1 is found, the SDRAM and the super capacitor remain powered to back up the image memory (even after the main power
switch has been turned off and the power plug has been disconnected).
Be sure to disconnect the IP modem cable before removing the RAM.
F-2-4
5) Remove the RAM cover [1].
- 4 screws [2]
F-2-5
6) Remove the 128MB RAM [1] in the direction of [A].
- 2 locking levers [2] (shift in the direction of [B])
F-2-6
7) If a UFRII LT PRINTER KIT-J2 is installed, perform steps 7-1) and 7-2).
[1]
[2]
[1]
[2]
[1]
[2] [1]
[B]
[B]
[A]