Canon BU-47H 1AM, Руководство по эксплуатации

Страница: 34 / 52

E14
5.Troubleshooting of Communication and Operation Error
Symptom
Site where
check is
required
Check and confirm
Camera control does not
work. Installation site (1) Check the power to the pan-tilt head.
(2) Check that the control cable for pan-tilt head and the
cable for camera are connected correctly.
(3) Conduct a continuity check for broken cable wires, etc.
Communication is not
possible with the operation
unit. Installation site (1) Check that each cable is connected correctly.
No video is displayed
although the pan-tilt head
can be operated. Installation site (1) Conduct a continuity check for broken cable wires, etc.
(Disconnect the BNC and check the video from the pan-
tilt head.)
The pan-tilt head does not
move. Installation site (1) This may be due to an outside factor such as strong
wind or some obstacle.
Check and remove any obstructing factors, and perform
the operation again.
6.Index
Control connectors .............................................................................. E13
Panning ............................................................................................... E12
SDI ...................................................................................................... E13
Tilting ................................................................................................... E12