Canon BJC-820 Скачать руководство пользователя страница 4

Страница: 4 / 105

Target Readers

This manual is published by Canon Inc. for qualified persons and contains the necessary technical

information for technical theory, installation, maintenance, and repair of products. This manual covers

all localities where the products are sold. For this reason, it may contain information that does not

apply to your locality.

Revisions

This manual may include technical inaccuracies or typographical errors due to improvements or

changes in the products. When amendments are made to the content of this manual, Canon will issue

technical information as the need arises. In the event of major alterations to the content of this manual

over a long or short period, Canon will publish a revised version of the manual.

The following paragraphs do not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names appearing in this manual are the registered trademarks or

trademarks of the individual companies.

Copyright

copied, reproduced, or translated into other languages, in whole or in part, without the express written

consent of Canon Inc. except in the case of internal business use.

Copyright



1999 by Canon Inc.

CANON INC.

BJ Products Quality Support Dept.

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213, Japan

This manual was produced on an Apple Macintosh



Power Mac 9600/233 personal computer and Apple

LaserWriter



II NTX-J laser beam printer; final pages were printed on Varityper



5300 with 4000-J RIP.

A Canon mo-5001S Magneto-Optical Storage Subsystem with mo-502M Magneto-Optical Storage Disk

Cartridge and mo-IF2 interface kit were used for storing large volumes of page layout and graphic data

for this manual.

All graphics were produced with MACROMEDIA FREEHAND



7.0J.

All documents and all page layouts were created with QuarkXPress



3.3J.

Содержание BJC-820









































































































Результаты поиска

Содержание BJC-820

Отзывы:

Похожие инструкции для BJC-820

Бренды по названию

Популярные бренды

Canon BJC-820, Руководство по обслуживанию

Результаты поиска

Содержание BJC-820

Отзывы:

Похожие инструкции для BJC-820

Бренды по названию

Популярные бренды