manualshive.com logo in svg

Canon BJC-55 Series, Сервисный бюллетень

Поделиться
Скачать
Canon BJC-55 Series Скачать руководство пользователя страница 131

3.2 BJ Cartridge

3.2.1 Color BJ cartridge structure

The color BJ cartridge contains a 136-nozzle print head (64 black nozzles, 24 yellow
nozzles, 24 magenta nozzles, and 24 cyan nozzles) for four colors.  The print head,
black ink cartridge, and color ink cartridges are designed to be replaced respectively.

a) Air hole

Each the black and colored ink cartridge has an air hole at the same pressure at the
atmospheric pressure.

b) Ink sponge

The ink sponge in the black ink cartridge absorbs black ink.  The color cartridge has
three ink sponges, each of which absorbs each color ink.

c) Ink supplier

The ink supplier supplies a constant amount of ink to the connection among the
head, black ink cartridge and color ink cartridge.

d) Bubble jet head unit

The bubble jet head unit consists of 136 nozzles and signal contacts.
Each nozzle has two heaters located one in front of the other.  By controlling the
temperature of the heaters, the small and large dots can be printed.

e) Holder

The holder has a partition between the black ink cartridge and the color ink
cartridge to prevent color mixture and to prevent from being mounted incorrectly the
black ink cartridge and the color ink cartridge.

4-21

BJC-50

Part 4: Technical Reference

Air Holes

Ink Supplier

Holder

Ink Suppliers

Ink Sponge

Ink Sponges

Bubble Jet Head Unit

Figure 4-14 Color BJ Cartridge

Содержание BJC-55 Series


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды