manualshive.com logo in svg

Canon BJC-55 Series, Сервисный бюллетень

Поделиться
Скачать
Canon BJC-55 Series Скачать руководство пользователя страница 10

COMP. SYSTEMS

- 10 -

PRNT-896

5-2. Ink Low Warning Reset By Button Operation

Ink low warning
This printer detects the remaining ink level by counting the number of ejected ink dots in
the same way as the BJC-50/50v.  When the setting of the ink low warning is enabled, and
the remaining ink gets low, the beeper sounds twice, and the 

ERROR INDICATOR blinks.

Pressing the 

Cartridge Replacement  button will sound the beeper and move the carriage

to the center, and the 

ERROR INDICATOR  indicates the ink cartridge for which the

remaining ink is low as shown below.
The ink low warning reset function by button operation is added to this printer.  The button

operation procedures are shown below.  (The ink low warning of the BJC-50/50v can be
reset from the host computer only.)

Operation
1) Turn on the printer.

2) Press the 

Cartridge Replacement  button to move the carriage to the center.

If the carriage was moved to the center by the driver, the reset operation by the  
button operation is not possible.

3) Make sure that the proper cartridge is installed in the carriage.  If not, install the proper 

one.  (The ink dot counter reset is effective only to the ink cartridge type installed in 
the carriage.) 

4) Press and hold the 

RESUME button for the number of beeps corresponding to the 

warned ink type to select the ink type for which the dot counter is to be reset, and  
release the 

RESUME button.  The number of beeps is as follows:

Once:  

The dot counter of the BCI-10/BCI-11Bk/BCI-12Bk is reset.

Twice:  

The dot counter of the BCI-11Color/BCI-12 Color is reset.

3 times:  

The dot counter of the BCI-11Bk&Color/BCI-12Bk&Color is reset.

4 times:  

The selected ink type is canceled.

5) Press the 

Cartridge Replacement  button.

The dot counter of the ink selected in the procedure 4) and the ink low warning are      
reset, and at the same time, the carriage returns to the home position.

Blinks once: when the remaining ink of the BCI-10 / BCI-11Bk / BCI-12Bk is little

Blinks twice: when the remaining ink of the BCI-11Color / BCI-12Color is little

Blinks 3 times: when the remaining ink of the BCI-11 BK & Color / BCI-12 BK & Color is little

Содержание BJC-55 Series


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды