Canon AXIS 1650 Скачать руководство пользователя страница 70

Страница: 70 / 75

Technical Specifications

AXIS 1650 User’s Manual

Section 14

Technical Specifications

Supported Devices

AXIS 1650 is developed to network Canon printers and multifunctional

products. If your Canon device also functions as a scanner, you can use

your AXIS 1650 as a scanner server, too.

AXIS 1650 supports Canon Advanced Printing Technology, Canon
Advanced Raster Printing System as well as Canon BubbleJet printers.

Supported Systems

Microsoft Windows

Windows 98, Windows 2000, Windows Me, Windows XP, Windows

Server 2003.

Print Methods: LPR, Raw TCP, CAPT over TCP/IP in Microsoft Windows.

Novell NetWare

6.X. NDPS supported over IP. Support for iPrint using IPP protocol.

WWW

Netscape Communicator 4.7 and above, Internet Explorer 4.0 and above.

Supported Protocols

Windows TCP/IP, WINS.

TCP/IP

LPD, FTP, BOOTP, ARP, RARP, DHCP, ICMP, IGMP, IP, TCP, UDP, HTTP,

SLP, SNMP, Raw TCP, DNS, DDNS.

Network Management

Print server/job/printer status presentation and management via standard

Web browser or ftp.

Supported Languages

English and Japanese.

Logical Connection

Supports NWay that provides auto-detection of network speed.

Use Ethernet II frame type, full duplex.

Wired Network

Attachments

RJ-45 connector (Category 5 shielded twisted pair cable) for 10baseT

Ethernet or 100base TX Fast Ethernet.

Printer Ports

•

One Low- and Full-Speed USB 1.1 port, and works with USB v 2.0
(Low-Speed and Full-Speed).
The USB cable shipped with the product supports Low-Speed and Full-
Speed.

Hi-Speed is not supported.

•

One high-speed IEEE 1284 compatible parallel port.

Important: AXIS 1650 does not support devices from other

manufacturers than Canon.

Содержание AXIS 1650












































































Результаты поиска

Содержание AXIS 1650

Отзывы:

Похожие инструкции для AXIS 1650

Бренды по названию

Популярные бренды

Canon AXIS 1650, Руководство пользователя

Результаты поиска

Содержание AXIS 1650

Отзывы:

Похожие инструкции для AXIS 1650

Бренды по названию

Популярные бренды