Print Server Management and Configuration
AXIS 1650 User’s Manual
47
Setting General Parameters
To change the print server’s general parameters, select Admin | General
Settings => Change in the Web interface.
Note: All print server settings have default values that have been
carefully selected by Axis. In most instances, there is no need to change
the default values. Observe that all network configuration should involve
the Network Administrator.
Print Server Name
This name identifies the print server to the users and will be part of the
default name of the connected printer and printer queue name. The
default name is AXISXXXXXX, where XXXXXX are the last six digits of
the print server serial number.
Example: If the serial number is 00 40 8c 18 16 36, the default print
server name is AXIS181636.
System Name
This name identifies the network printer to the users.
Default = <blank>
System Location
This parameter allows you to specify where the network printer is located
in your organization. This enables you to find the device you are working
with.
Default = <blank>
System Contact
Enter the name of e.g. the System Manager.
Default = <blank>
System Contact Phone Nbr.
Enter the telephone number of e.g. the System Manager.
Default = <blank>
System Comment
Enter comments regarding the network printer.
Default = <blank>
Language
Select the language to be displayed in the print server’s embedded Web
pages: English or Japanese.
Root Password
Enter a password in the field. Up to 15 alphanumeric characters can be
entered.
Default = <blank>
Network Speed
Set your network speed: 10_HALF_DX, 10_FULL_DX, 100_HALF_DX,
100_FULL_DX or let the print server sense the correct speed
(AUTO_SENSE).
Default = AUTO_SENSE
SNMP Enabled
Select
Yes
to permit access using the SNMP protocol, select
No
to reject
access using the SNMP protocol.
Default = Yes
Community Name
Specify the community name for SNMP. Up to 32 alphanumeric
characters can be entered.
Default = public