manualshive.com logo in svg

Canon AK1, Руководство по эксплуатации, Страница: 50 / 62

Поделиться
Скачать
Canon AK1 Скачать руководство пользователя страница 50

Specifications

Finisher-AK1

NOTE

Whenever a number of sheets is mentioned in the table below, the figure is based on media of

80 g/m² (20 lb bond).

Specifications of Finisher-AK1

Item

Specification

Paper size/weight/type

Size:
A3, B4, A4, A4R, B5, B5R, 13" x 19" (330.2 mm x 482.6
mm), 12" x 18" (304.8 mm x 457.2 mm), 11" x 17" (279.4
mm x 431.9 mm), LGL, LTR, LTRR, EXEC, EXECR, 12 5/8"
x 17 3/4" (320 mm x 450 mm), and custom sizes (182 mm
x 182 mm to 330.2 mm x 487.7 mm (7.2" x 7.2" to 13" x
19.2")).
Weight: 52 g/m² - 300 g/m² (14 lb bond - 110 lb cover)
Type: Thin, Plain, Heavy, Recycled, Colour, Pre-punched,
Bond paper, Transparency, Tab paper, Labels, Coated,
Texture paper, Vellum, Carbonless

Capacity of upper tray
(No finishing selected, Sort by set,
Sort by page)

A3, B4, A4, A4R, B5, B5R, 13" x 19" (330.2 mm x 482.6
mm), 12" x 18" (304.8 mm x 457.2 mm), 11" x 17" (279.4
mm x 431.9 mm), LGL, LTR, LTRR, EXEC, EXECR, 12 5/8"
x 17 3/4" (320 mm x 450 mm), and custom sizes (182 mm
x 182 mm to 330.2 mm x 487.7 mm (7.2" x 7.2" to 13" x
19.2")):
1,000 sheets (or 147 mm (5.8") in height).

Capacity of upper tray
(When finishing is selected (Sort by
set and Offset stacking / Sort by page
and Offset stacking))

A3, B4, A4, A4R, B5, B5R, 12" x 18" (304.8 mm x 457.2
mm), 11" x 17" (279.4 mm x 431.9 mm), LGL, LTR, LTRR,
EXEC, EXECR, and custom sizes (182 mm x 182 mm to
304.8 mm x 457.2 mm (7.2" x 7.2" to 12" x 18")):
1,000 sheets (or 147 mm (5.8") in height).

Capacity of upper tray
Z-fold (only when Paper Folding
Unit-F1 is attached)

30 sheets

Capacity of upper tray
Half-fold (only when Paper Folding
Unit-F1 is attached)

50 sheets/5 sets (each set contains 10 sheets)

Capacity of lower tray
(No finishing selected, Sort by set,
Sort by page, and High-volume
mode is [Off])

NOTE

If the capacity values of the
different paper sizes are
different, the smallest val-
ue is applied to the lower
tray capacity.

• A4, B5, LTR, EXEC, and custom sizes (182 mm x 182

mm to 297 mm x 215.9 mm (7.2" x 7.2" to 11.7" x
8.5")):
2,000 sheets (or 285 mm (11.2") in height).

• A3, B4, A4R, B5R, 13" x 19" (330.2 mm x 482.6 mm),

12" x 18" (304.8 mm x 457.2 mm), 11" x 17" (279.4 mm
x 431.9 mm), LGL, LTRR, EXECR, 12 5/8" x 17 3/4" (320
mm x 450 mm), and custom sizes (182 mm x 216 mm
to 330.2 mm x 487.7 mm (7.2" x 8.5" to 13" x 19.2")):
1,000 sheets (or 147 mm (5.8") in height).

4

Specifications

50

Appendix A - Miscellaneous

Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1

Содержание AK1































































Отзывы:

Нет отзывов