Canon AK1 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 62

Canon AK1 Скачать руководство пользователя страница 21

Check the status of the staple cartridges

Introduction

The stacker/stapler is the output location that can staple printed documents before these are
delivered into an output tray. Before each of the following output trays, 2 staplers are present:
• The upper tray.
• The lower tray.
• The booklet tray (optional).

The booklet tray is only available when your stacker/stapler is equipped with the optional
saddle stitch unit.

When all the staple cartridges are sufficiently filled, the staple icon in the dashboard is blue.
When the staple icon in the dashboard is orange or red, one of the staple cartridges is empty or
almost empty. You must refill the staple cartridge as soon as possible.

To find out which staple cartridge is empty or almost empty, you must go to the [Printer] section
of the [System] view. The icon for the staple cartridge that must be refilled is orange or red.

NOTE

Even when the staple icon is blue, you can still go to the [System] view to check the number of

staples that has been used since the last refill.

The colors of the staple icon

The colors of the staple icon

Staple icon

Description

A blue staple icon indicates that all the staple cartridges contain suffi-
cient staples.

An orange staple icon indicates that one of the staple cartridges is al-
most empty.

A red staple icon indicates that one of the staple cartridges is empty.
The printer stops when a job requires staples from the empty staple
cartridge.

Check the status of the staple cartridges

Chapter 3 - Use the stacker/stapler

21

Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1

Operation Guide Finisher-AK1, Saddle Finisher-AK2, Puncher Unit-BT1-BU1: VarioPrint (VP) 110, VP120, VP135 - Edition 2013-06

«
...
19
20
21
22
23
...
»

Содержание AK1































































Отзывы:

Нет отзывов