Canon 9842A002 Скачать руководство пользователя

Страница: 85 / 96

Troubleshooting

Cause

The scanner’s SCSI ID is identical to the SCSI ID of
another device.

Remedy

Check the SCSI IDs of all SCSI devices connected to the system
and set a unique SCSI ID for the scanner. (See p. 22.)

Cause

The terminator is not set correctly.

Remedy

Shut down both the PC and the scanner, and then turn the scanner
ON first, and then the PC. (See p. 25.)

Cause

There is a problem with another SCSI device that is
connected in the daisy chain.

Remedy

Do not use the daisy chain connection configuration. (See p. 22.)

Cause

The PC was turned ON before the scanner.

Remedy

Shut down both the PC and the scanner, and then turn the scanner
ON first, and then the PC. (See p. 25.)

Cause

The scanner is not ON.

Remedy

Refer to “The Scanner Does Not Turn ON,” on p. 81 and check
to see if the scanner is ON. If the scanner is not ON, shut down
the PC, then turn the scanner ON first, and then the PC.
(See p. 25.)

Cause

The SCSI card is not compatible with the scanner.

Remedy

Use a recommended SCSI card. (See “SCSI Cards,” on p. 19)

Содержание 9842A002

































































































Результаты поиска

Содержание 9842A002

Отзывы:

Похожие инструкции для 9842A002

Бренды по названию

Популярные бренды

Canon 9842A002, Руководство для стартапов

Результаты поиска

Содержание 9842A002

Отзывы:

Похожие инструкции для 9842A002

Бренды по названию

Популярные бренды