Canon 7086 Series, Руководство по обслуживанию

Страница: 321 / 735

Chapter 8
8-21
T-8-16
In the case of cassette 3/4, the resistance of the variable resistor operating in conjunction with the movement of the lifter drive shaft is used to find out the level of
paper.
F-8-27
SERVICE MODE:
COPIER > ADJUST > CST-ADJ > C3-LVOL
Use it to enter a stack height for the cassette 3. (50 sheets) Record the above readings on the service label.
COPIER > ADJUST > CST-ADJ > C3-HVOL
Use it to enter a stack height for the cassette 3. (275 sheets) Record the above readings on the service label.
COPIER > ADJUST > CST-ADJ > C4-LVOL
Use it to enter a stack height for the cassette 4. (50 sheets) Record the above readings on the service label.
COPIER > ADJUST > CST-ADJ > C4-HVOL
Use it to enter a stack height for the cassette 4. (275 sheets) Record the above readings on the service label.
8.6.5 Cassette Deck Right/Left
0010-8212
iR7105 / iR7095 / iR7086
The cassette deck right/left is not equipped with a paper detecting mechanism, and the paper size is switched as follows (A4, B5, and LTR):
1. By changing the paper size plate of the cassette.
2. By registering the new paper size in service mode.
SERVICE MODE:
COPIER > OPTION > CST > P-SZ-C1
(Use it to specify paper size used in the right deck )
6: A4[default], 15: B5, 18: LTR
COPIER > OPTION > CST > P-SZ-C2 (Use it to specify paper size used in the left deck )
6: A4[default], 15: B5, 18: LTR
Deck right Deck left
Paper level [1] Sensor (PS51) [2] Sensor (PS52) Sensor (PS22) [1] Sensor (PS54) [2] Sensor (PS55) Sensor (PS32)
100% to about 50% ON ON OFF ON ON OFF
About 50% to about 10 OFF ON OFF OFF ON OFF
About 10% or less OFF OFF OFF OFF OFF OFF
None OFF OFF ON OFF OFF ON
Paper level (much)
Paper level (little)
Main controller PCB
Variable
resistor
Variable
resistor