Canon 5157B002, Инструкция по эксплуатации

Страница: 107 / 292

107
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This feature is called Auto
Lighting Optimizer. The default setting is [
Standard ]. With JPEG images,
the correction is done when the image is captured. For RAW images, it can
be corrected with Digital Photo Professional (provided software, p.270).
1
Select [Auto Lighting Optimizer].
Under the [
2
] tab, select [ Auto
Lighting Optimizer ], then press
<
0
>.
2
Select the setting.
Select the desired setting, then press
<
0
>.
3
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
3
Correcting the Brightness and Contrast Automatically
N
Without correction With correction
Under [
7
Custom Functions (C.Fn) ], if [ 5: Highlight tone priority ] is
set to [ 1: Enable ], the Auto Lighting Optimizer will be set automatically to
[ Disable ] and you cannot change this setting.
Depending on the shooting conditions, noise might increase.
If a setting other than [ Disable ] is set and you use exposure
compensation, flash exposure compensation, or manual exposure to
darken the exposure, the image might still come out bright. If you want a
darker exposure, set [
Auto Lighting Optimizer ] to [ Disable ] first.
In Basic Zone modes, [ Standard ] is set automatically.
COP
Y