Canon 5031B001, Руководство пользователя

Страница: 25 / 196

Taking Pictures (Smart Auto)
25
• What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and
exposure will continuously adjust (Servo AF).
• What if a flashing appears?
Attach the camera to a tripod so that the camera does not move and blur the
image.
• What if the camera does not play any sounds?
Pressing the
l
button while turning on the camera power will turn off all
sounds. To turn the sounds on, press the
n
button to choose [Mute] from
the
3
tab, then press the
qr
buttons to choose [Off].
• What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle (
j
), and
approximately 50 cm – 2.0 m (1.6 – 6.6 ft.) at maximum telephoto (
i
).
• What if the camera beeps once when the shutter button is pressed
halfway?
Your subject may be too close. When the camera is at maximum wide angle
(
j
), move about 3 cm (1.2 in.) or more away from your subject and shoot.
Move about 80 cm (2.6 ft.) or more away when the camera is at maximum
telephoto (
i
).
• What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting
in dark areas.
• What if the screen turns off when you try to shoot?
When flash recharging begins, the screen turns off. The screen turns on again
when recharging ends.
What if an icon appears in the upper right of the screen?
The icon for the determined scene will appear in the upper right of the screen. For
details on the icons that appear, see “Scene Icons” (p. 164).
Choosing the subject to focus on (Tracking AF)
After pressing the
o
button and displaying , point the camera so that is
on the subject you want to focus on. Press and hold the shutter button halfway to
display a blue frame where focus and exposure will be maintained (Servo AF).
Press the shutter button fully to shoot.
COP
Y