![background image](http://html.mh-extra.com/html/canon/4k6021z/4k6021z_user-manual_62437144.webp)
Menu Description
142
The following display times are also changed.
Menu rotation
Rotate menu display. When projecting in portrait orientation, for example, with the projector
installed at a 90° angle, specify the orientation of projected menus to align them with the top
or bottom of projected images.
Option
Function
Auto
Automatically rotates menus as needed after using an accelerometer
to determine if the projector is installed in portrait orientation (90°
clockwise or counterclockwise) or horizontally.
Off
Menus are not rotated. Menus are shown in a readable orientation for
projectors installed horizontally.
90 degrees
counterclockwise
Menus are rotated 90°. Menus are shown in a readable orientation for
projectors installed in portrait orientation (90° clockwise or
counterclockwise).
90 degrees
clockwise
Guide
Shows the guide screen.
Option
Function
Off
Hides the guide screen.
On
Shows the guide screen.
Item
[Normal]
[Extended]
- Menu screen
- Edge blending (
)
30 seconds 3 minutes
- Input (
- Keystone (
)
- Keystone reset (
)
- Focus (
- Zoom (
)
- Lens shift (
- Lens shift reset (
)
- Aspect (
)
- Image mode (
)
- Volume (
- Gamma (
10 seconds 3 minutes
• To determine the orientation of menu rotation, projector orientation is detected
immediately after startup or when this setting is switched to [Auto].
• Menus are not rotated automatically in response to changes in projector orientation
during projection.
The guide screen is shown at the following cases.
• No input signal is detected.
• An invalid button is pressed in [BLANK] or [FREEZE] mode (
).
) is set to [On] and buttons locked by this feature are
pressed.
Содержание 4K6021Z
