Canon 3814B004 - EOS 7D Digital Camera SLR, Инструкция по эксплуатации

Страница: 109 / 296

109
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±3 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Select [Expo. comp./AEB].

Under the [
2
] tab, select [ Expo.
comp./AEB ], then press < 0 >.
2
Set the AEB amount.

Turn the <
6
> dial to set the AEB amount.

You can set the exposure compensation
amount with the <
5 > dial. If AEB is
combined with exposure compensation,
AEB will be applied centering on the
exposure compensation amount.

Press <
0
> to set it.

When you exit the menu, <
h
> and the AEB
level will be displayed on the LCD panel.
3
Take the picture.

Focus and press the shutter button
completely. The three bracketed shots will be
taken in this sequence: Standard, decreased
exposure, and increased exposure.

Follow steps 1 and 2 to turn off the AEB amount display.

AEB will be canceled automatically when you set the power switch
to <
2 > or when the flash is ready to fire.
h
Auto Exposure Bracketing (AEB)
N
AEB amount
Canceling AEB

If the drive mode is set to <
u
>, you must press the shutter button three
times. When <
o
> or <
i
> is set and you hold down the shutter button
completely, the three bracketed shots will be taken continuously. Then
the camera will stop shooting. When <
Q > or <
k
> is set, the three
bracketed shots will be taken continuously after a 10-sec. or 2-sec. delay.

Neither flash nor bulb exposures can be used with AEB.