Canon 3225, Руководство по обслуживанию

Страница: 570 / 746

Chapter 17
17-72
17.4.1.12 COPIER > ADJUST > CST-ADJ
0019-9289
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
T-17-27
LOOP-SP 2 Title Registration loop (arch) adjustment at special paper pickup
Purpose -
Note
Settings/Adjustment range -128 to 127
Unit -
Amount of change per unit -
Value at RAM clear/at factory
shipment 0
Setting/Adjustment/Operation
method 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
key.
2) Turn OFF and then ON the main power switch.
Paper is fed 0.1mm more with 1-increment in the setting value, resulting in increased registration loop
(arch) amount.
Relevant Service Mode -
Supplementary info/Memo -
LOOP-ENV 2 Title Registration loop (arch) adjustment at envelope pickup from the cassette
Purpose -
Note Paper is fed 0.1mm more with 1-increment in the setting value, resulting in increased registration loop
(arch) amount.
Settings/Adjustment range -128 to 127
Unit -
Amount of change per unit -
Value at RAM clear/at factory
shipment 0
Setting/Adjustment/Operation
method 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
key.
2) Turn OFF and then ON the main power switch.
Paper is fed 0.1mm more with 1-increment in the setting value, resulting in increased registration loop
(arch) amount.
Relevant Service Mode -
Supplementary info/Memo -
COPIER > ADJUST > CST-ADJ
Item Level Description
MF-A4R 1 Title Basic numeric value entry for paper width of A4R manual feed tray
Purpose - When executing RAM clear of DC controller PCB/replacing DC controller PCB
- In case of registering value when replacing paper width detection VR/for the first time
Note - When executing RAM clear of DC controller PCB/replacing DC controller PCB.
- In case of registering value when replacing paper width detection VR/for the first time, Be sure to
execute the following In service Mode: COPIER>FUNCTION>CST>A4R.
In case of changing the setting value, be sure to note the setting value on main station service label.
Settings/Adjustment range 0 to 1024
Unit -
Amount of change per unit -
Value at RAM clear/
adjustment at factory
shipment 516/Yes
Setting/Adjustment/Operation
method 1) Select the item to be highlighted to enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode COPIER > FUNCTION > CST > A4R (Level 1)
Supplementary info/Memo -
COPIER > ADJUST > FEED-ADJ
Item Level Description