Canon 3225, Руководство по обслуживанию

Страница: 337 / 746

Chapter 10
10-35
10.5.20.3 Before Removing the Main Motor (iR 3225)
0019-8358
iR3225 / iR3225N
1) Remove the upper rear cover.
(page 10-17)
Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover.
(page 10-17)
Reference[Removing the
Lower Rear Cover]
10.5.20.4 Removing the Main Motor (iR 3225)
0019-8360
iR3225 / iR3225N
1) Remove the main motor [3].
- 1 connector [1]
- 4 screws [2]
F-10-102
10.5.21 Fixing Driver Motor
10.5.21.1 Removing the Fixing Driver Motor
0018-9969
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
(Perform the same procedure from step 1 to 2 as in 'Removing the DC Con-
troller PCB'.)
(page 10-27)
Reference[Removing the DC Controller PCB]
1) Remove the DC controller PCB mounting plate [3].
- 6 wire saddles [1] (removing the harness)
- 3 edge saddles [2] (removing the harness)
- 13 connectors [4]
- 4 screws [5]
F-10-103
Adjusting the Tension of the Main Motor
1) Temporarily fix the main motor mounting plate in place to the main drive
unit.
2) So that the motor gear and the teeth of the pulley mesh correctly, move
the motor in the direction of the arrow.
3) Tighten the screws of the main motor mounting plate in the order indicated
([A] -> [B] -> [C] -> [D]).
[1]
[2] [2]
[A]
[D]
[B]
[C]
[3]
[1]
[2]
[2]
[1] [4] [2]
[1]
[3] [5]
[2]
[4]
[4]
[2] [5]
[1]
[4]
[5]
[5]