manualshive.com logo in svg

Canon 2080B001 - XL H1S Camcorder, Инструкция по эксплуатации

Canon 2080B001 - XL H1S - это профессиональный видеокамеры, способный создавать качественные видеоролики. Чтобы овладеть всеми функциями этой камеры, обязательно скачайте инструкцию по эксплуатации совершенно бесплатно на сайте manualshive.com. Не упустите возможность получить максимум от этого устройства!

Поделиться
Скачать
background image

2

Introduction

Important Usage Instructions

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED 
ACCESSORIES ONLY.

COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to 
copyright laws.

HD Video Camera Recorder, XL H1S A / XL H1A A Systems.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600

CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Important Warning

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure, that may 
be of sufficient magnitude to constitute a risk of 

electric shock to persons.

The exclamation point, within an equilateral 
triangle, is intended to alert the user to the 
presence of important operating and maintenance 
(servicing) instructions in the literature 

accompanying the product.

CO

PY

Содержание 2080B001 - XL H1S Camcorder




































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2080B001 - XL H1S Camcorder

Samsung HMX-E10BN License Agreement preview
HMX-E10BN
Бренд: Samsung Страницы: 7
Samsung EX1 Price List preview
EX1
Бренд: Samsung Страницы: 2
Panasonic SDR-H79P Operating Instructions Manual preview
SDR-H79P
Бренд: Panasonic Страницы: 124
Panasonic NV-GS 8 EB Operating Instructions Manual preview
NV-GS 8 EB
Бренд: Panasonic Страницы: 64
Panasonic NV-GS35EP Operating Instructions Manual preview
NV-GS35EP
Бренд: Panasonic Страницы: 110
Sony CCD-TR3100E Service Manual preview
CCD-TR3100E
Бренд: Sony Страницы: 15
Sony CCD-TR440PK Service Manual preview
CCD-TR440PK
Бренд: Sony Страницы: 21
Sony CCD-TR416PK Service Manual preview
CCD-TR416PK
Бренд: Sony Страницы: 25
Sony CCD-CR1 - Video Camera Recorder 8mm Service Manual preview
CCD-CR1 - Video Camera Recorder 8mm
Бренд: Sony Страницы: 15
Sony CCD-M8U Manual preview
CCD-M8U
Бренд: Sony Страницы: 33
Sony CCD-PC1 Service Manual preview
CCD-PC1
Бренд: Sony Страницы: 39
Sony CCD-TR614 - Video Camera Recorder 8mm Operation Manual preview
CCD-TR614 - Video Camera Recorder 8mm
Бренд: Sony Страницы: 56
Sony CCD-TR517WR - Video Camera Recorder 8mm Operating Instructions Manual preview
CCD-TR517WR - Video Camera Recorder 8mm
Бренд: Sony Страницы: 68
Sony CCD-TR516 - Video Camera Recorder Hi8&trade Operating Instructions Manual preview
CCD-TR516 - Video Camera Recorder Hi8&trade
Бренд: Sony Страницы: 76
Sony CCD-TR315/TR416 Operating Instructions Manual preview
CCD-TR315/TR416
Бренд: Sony Страницы: 76
Sony CCD-CR1 - Video Camera Recorder 8mm Operating Instructions Manual preview
CCD-CR1 - Video Camera Recorder 8mm
Бренд: Sony Страницы: 76
Sony CCD TRV37 - Hi8 Camcorder Operating Instructions Manual preview
CCD TRV37 - Hi8 Camcorder
Бренд: Sony Страницы: 88
Sony CCD-SC55 (English and Spanishl) Operating Instructions Manual preview
CCD-SC55 (English and Spanishl)
Бренд: Sony Страницы: 105

Бренды по названию

Популярные бренды

Загрузить еще бренды