Canon 1293B002AA/006AA - Lcos Xga Projector Скачать руководство пользователя страница 25

Страница: 25 / 188

Supplied Accessories

Before Use

Pay attention to the following points when handling the bat-
teries. Failing to do so could result in a fire or personal
injury.

• Do not heat, short circuit or disassemble the batteries, or

place them in a fire.

• Do not attempt to recharge the batteries.

• Remove the batteries when they are flat or when the

remote control will not be used for a long period of time.

• When replacing the batteries, replace both batteries at the

same time and do not use two batteries of a different type
together.

• Insert the batteries with the + and - terminals in the correct

directions.

• If any liquid from inside the batteries leaks out and con-

tacts your skin, be sure to wash the liquid off thoroughly.

Содержание 1293B002AA/006AA - Lcos Xga Projector





























































































































































































Результаты поиска

Содержание 1293B002AA/006AA - Lcos Xga Projector

Отзывы:

Бренды по названию

Популярные бренды

Canon 1293B002AA/006AA - Lcos Xga Projector, Руководство пользователя

Результаты поиска

Содержание 1293B002AA/006AA - Lcos Xga Projector

Отзывы:

Бренды по названию

Популярные бренды