Canon 1211B002 - DR 1210C страница 20 Скачать руководство пользователя | Manualshive

Страница: 20 / 98

background image

16

Before Using the Scanner

4. Installation Requirements

To use the DR-1210C, your computer must satisfy the following system
requirements.

• One of the following operating systems.

- Microsoft Windows 2000 Professional SP4 or later
- Microsoft Windows XP Professional SP2 or later
- Microsoft Windows XP Home Edition SP2 or later

• A computer that meets the following specifications:

- CPU: Pentium 4 (1.8 GHz or faster)
- Memory: 256 MB or more (1 GB or more recommended)
- Hard disk: 1 GB or more available space
- CD-ROM drive
- Hi-Speed USB 2.0 interface
- Monitor: Resolution of 1024 × 768 (XGA) or better recommended

• Use the standard equipped Hi-Speed USB 2.0 interface, or use one of the

USB 2.0 interface cards recommended for use with this scanner:

•

USB 2.0 interface cards made by Adaptec (for PCI bus)

- USB2connect2000LP (AUA-2000)
- USB2connect3100 (AUA-3100LP)
- USB2connect5100 (AUA-5100)

•

USB 2.0 interface cards made by Adaptec (for card bus)

- USB2connect for Notebooks (AUA-1420)

• An ISIS-compatible application or a TWAIN-compatible application that is

compatible with the above operating systems.

IMPORTANT

• Use the most recent version of the USB 2.0 driver provided by Microsoft.

Contact your local authorized Canon dealer or service representative for
more detailed information.

• Computer operations are not guaranteed with all standard equipped

computer USB interfaces. If the scanner does not function normally on the
standard equipped computer USB interface, then use a recommended
Hi-Speed USB 2.0 interface card.

• Use the USB cable provided with the scanner, or a Hi-Speed USB 2.0

compatible cable.

• If the CPU, memory, interface card, and other specifications do not satisfy

the installation requirements, the scanning speed may be greatly reduced and
transmission may take a long time.

• Even if the computer satisfies the recommended specifications, the scanning

speed may vary, depending on the scan settings.

• The ISIS/TWAIN Drivers provided with the scanner do not necessarily

operate on all ISIS- or TWAIN-compatible applications. For details, contact
your application software retailer.

DR-1210C.book Page 16 Monday, December 19, 2005 10:35 AM

«
...
18
19
20
21
22
...
»

Содержание 1211B002 - DR 1210C



































































































Отзывы:

Нет отзывов

Похожие инструкции для 1211B002 - DR 1210C

Бренд: Keithley Страницы: 188

Бренд: Unitech Страницы: 4

Бренд: Unitech Страницы: 2

IRISPEN EXECUTIVE 6-MAC

Бренд: I.R.I.S. Страницы: 58

Film2digital MovieMaker

Бренд: Wolverine Страницы: 11

Бренд: Autel Страницы: 12

SmartOffice PS3060U

Бренд: Plustek Страницы: 2

CyberView PF 135+

Бренд: Pacific Image Electronics Страницы: 18

90-8010-200 - DocuMate 250

Бренд: Xerox Страницы: 88

Бренд: Panasonic Страницы: 46

Бренд: Radio Shack Страницы: 44

Бренд: RAYLASE Страницы: 26

imageFORMULA DR-2050C

Бренд: Canon Страницы: 4

DR-6050C - imageFORMULA - Document Scanner

Бренд: Canon Страницы: 2

Laser Line Probe HD

Бренд: Faro Страницы: 28

Бренд: VuPoint Страницы: 2

Бренд: VuPoint Страницы: 2

Бренд: VuPoint Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды