Canon 0860B001 Скачать руководство пользователя страница 128

Страница: 128 / 140

10-9

Mach

ine Settings

PRINTER SETTINGS

(The factory default setting is in

bold

face.)

TIMER SETTINGS

(The factory default setting is in

bold

face.)

Name

Descriptions

1. ERROR TIME OUT

Sets the length of time before the machine returns an error
when no data is received from the computer.

The error time out is on. Sets the time out period.
5SEC to 300SEC (

15SEC

)

OFF

The error time out is off.

Name

Descriptions

1. DATE/TIME SETTING

Sets the current date and time.
year, month, day, hour, minute

2. DATE SETUP

Selects the format of the date displayed in the LCD.

DD/MM YYYY

, YYYY MM/DD, MM/DD/YYYY

3. AUTO CLEAR

Sets the auto clear function. If the machine remains idle for
a set amount of time, the display returns to the standby
mode.

Sets the time until the machine returns to the standby
mode.
1MIN. to 9MIN. (

1MIN.

)

OFF

The auto clear function is turned off.

4. ENERGY SAVER

Sets the energy saver mode.

Sets the time until the machine enters the energy saver
mode.

1. ENEGY SVR TIME 1

3MIN. to 30MIN. (

5MIN.

)

2. ENEGY SVR TIME 2

30MIN. to 300MIN. (

120MIN.

)

OFF

The auto energy saver function is turned off.

5. SUMMER TIME

Sets the daylight save time.

The daylight save time setting is enabled.

1. BEGIN DATE/TIME

Sets the MONTH, WEEK, and DAY when the daylight save
time starts.

2. END DATE/TIME

Sets the MONTH, WEEK, and DAY when the daylight save
time ends.

OFF

The daylight save time setting is disabled.

Содержание 0860B001













































































































































Результаты поиска

Содержание 0860B001

Отзывы:

Canon 0860B001, Руководство пользователя, Страница: 128 / 140

Результаты поиска

Содержание 0860B001

Отзывы: