Canon 0213B002, Инструкция по эксплуатации

Страница: 34 / 128

11
POWER
Turn the power ON.
When the power of the RE-455X is turned ON, the POWER
indicator on the operation panel lights up.
Turn ON the power source of the other equipment to be used.
Either the power of the RE-455X or other equipment may be turned on first.
Put the document at the center of the document
table.
If no image is displayed, check to see that the lens cap has been
removed.
1
2
3
POWER
The power of the RE-455X should be turned OFF when the unit is not used.
Disconnect the power cord if the unit will not be used for extended periods.
• When the power is turned on, it takes about 20 seconds to
show an image.
• When the power is turned on, white balance and focus are
automatically adjusted.
Focusing.
Auto focus will activate when the power is turned ON.
If auto focus does not bring the subject into focus, switch to manual focus.
4
When operation is completed, turn the power
OFF.
The POWER indicator goes off. The illumination lamps will go off
(if they are on). Also turn OFF the power of other equipment.
5
After turning the power OFF, wait at least 5 seconds before
turning the power ON again. Turning the power ON too soon
may cause a malfunction.
Document table
Power switch Operation Panel
OPERATION
3
NOTICE