1
SI BB30 Crankset Compatability
the BB shell is compatable with the BB30 standard. see http://www.bb30standard.com/ For
information on Cannondale Hollowgram sL
Cranksets,
see http://www.cannondale.com/tech/.
Bearing Maintenance
shell bearings (kB6180/) are sealed cartridge type and do not require lubrication. inspect
bearing condition annually (at a minimum) and anytime the crankset assembly is disassembled
or serviced. the bearings are a press fit within the shell. old bearings should not be reinstalled
if removed. replace both bearings at the same time.
replacements circlips (QC616/) are available if the circlips become damaged. the circlips can be
lifted from the BB groove by lifting the hooked end with a thin blade screwdriver.
CAUTION
DO NOT FACE, MILL OR MACHINE THE BOTTOM BRACKET SHELL FOR ANY REASON.
Doing so can result in serious damage and possibly a ruined bike frame.
Cannondale SI BB30 Tools
kt011/ is a bearing removal tool. kt010/ is a set of bearing installation tools to be used with
a standard headset press. kt013/ a two piece tool set required for removing si Hollowgram
alloy cranksets. For information see
SI Cranksets Owner’s Manual Supplement
. see http://www.
cannondale.com/tech/.
SI BB30-to-68mm Standard Adapter
the adapter (Cannondale kit kF365/) converts the BB30 bottom bracket cranksets for use with
68mm bottom brackets. the adapter is not a repair part and will only work in undamaged
frames in good condition. improper installation or removal can result in damage and void
applicable frame warranty.
REPLACEMENT PARTS
NO.
ORDER NO.
KIT DESCRIPTION
1.
QC616/
Kit, Circlip,BB-SI
2.
KB6180/
Kit, Bearings-BB-SI; contains 2 bearings for
the bottom bracket SKF#6806-2RS /SRI2
/90% fill
2.
KP018/
KIT,BEARING,BB-SI,CERAMIC,2PCS
kt010/
BearinG instaLLation tooLs
kt011/
BearinG remoVaL tooL
kP009/
68mm aDaPter
kF365/
aDaPter w/ instaLL tooL
kF366/
aDaPter remoVaL tooL
