Cannondale Moterra NEO, Дополнение к руководству пользователя

Страница: 4 / 24

2 137366 Rev 1.
English 2019 Moterra Neo - Owner’s Manual Supplement
GENERAL EBIKE SAFETY INFORMATION
Intended Use
This model is equipped with an electric
pedal assist drive system. It is not a moped
or motorcycle. In EU countries, it is known
legally as an “EPAC” cycle or Electrically
Powered Assisted Cycle.
The drive assist system consists of a drive
unit, a battery, a computer control, and
various electronic components (harness
wires, sensors, and switches). This model
bike does share components common with
pedal-only bikes.
It is important to know that when the assist
system is turned ON, the drive unit engages
to provide power only while you are pedaling.
The amount of power provided by the drive
unit depends on your pedaling force and
the assistance mode/level you set with the
handlebar control unit. At anytime, if you
stop pedaling, the drive assist will dis-
engage. In all modes/levels, the drive assist
system power reduces progressively and
cuts off as the bike reaches a the maximum
allowable speed. The drive-assist re-engages
when speed drops below the maximum
allowable speed as long as the pedals are
turning.
Whenever the drive assist system is turned
OFF, You can pedal the bike normally. The
drive system will not engage.
UNDERSTAND YOUR BIKE , DRIVE SYSTEM
AND THE INTENDED USE OF BOTH. USING
YOUR BIKE THE WRONG WAY IS DANGEROUS.
See “Specifications” in this manual for the
Intended Use of your specific model.
Please read your Cannondale Bicycle Owner’s
Manual for more information about Intended
Use and Conditions 1-5.
DRIVE SYSTEM: You must follow the
manufacturer’s instruction for intended use or
limitation.
Compliance/Regulation
MAXIMUM ALLOWABLE ASSIST SPEED:
The drive assist system is limited to a
maximum continuous power rating as
idicated in “Specifications.”
YOU MUST FOLLOW ALL LOCAL LAWS:
It is your responsibility to identify and
follow all local laws and regulations
(including fitting your bike with additional
equipment) necessary to comply with
your state and local laws.
Ask your local Cannondale Dealer for
more information about operating an
electrically assisted pedal bicycle in your
area.
Drive System
MANUFACTURER’S INSTRUCTIONS - In
addition to this supplement, you must read and
follow the manufacturer’s instructions for all
components of the drive assist system :
Drive Unit Battery
Display/Control Unit Charger
These instructions contain correct operation,
service and maintenance information. Drive
system instructions can be also be found at
www.cannondale.com.