20
Moterra Neo - Shimano DU-E7000
Technical Information
Yoke / Shock Eyelet
138684 Rev 1 (03/22)
Yoke / Shock Eyelet
15 N·m
ANTI-S
1
3
4
2
Loctite 242 (blue)
2
1. Yoke
2. Shock
3. Bolt (female)
4. Bolt (male)
Identification
The following is standard maintenance and
should be repeated as often as necessary to
ensure a quiet bike:
1. Disconnect the rear shock from the yoke and
clean the yoke bolts, eyelet, and the shock
eyelet surfaces with isopropyl alcohol and a
clean shop towel.
2. Apply anti-seize thread lubricant (Perma-
tex®) to the shaded surfaces shown above.
This includes the inside chamfer on the yoke
bolts. Do not use grease; grease does not
perform as well as anti-seize.
3. Clean the smaller (male) yoke bolt and apply
a 3 mm wide band of Loctite 242 (blue) at the
first few threads.
4. Tighten to 15 N-m. Hold the large (female)
yoke bolt with an inserted hex key and
tighten the smaller (male) yoke bolt.