Cannondale LEFTY SPEED DLR2, Дополнение к руководству пользователя

Страница: 16 / 36

16
IMPORTANT INFORMATION ABOUT RIDING IN WET, VERY
HUMID, OR COASTAL CONDITIONS
The Cannondale Headshok needle bearing system uses precise components such as
bearings and races that are made of high strength steel. These components require
proper maintenance before and after riding in severely wet conditions.
PRE-RIDE CHECKS
The following service and checks are
recommended above and beyond typical
scheduled maintenance if riding in
severely wet conditions.
1. Inspect fork boot for rips and tears.
2. Inspect and renew grease under fork
boot.
3. Clean, dry, and oil breather filter
element.
4. Ensure zip-ties and band clamps
are properly tightened (replace as
needed)
POST-RIDE CHECKS
The following service and checks are
recommended above and beyond typical
scheduled maintenance after riding in
severely wet conditions.
1. Inspect and renew grease under fork
boot – wipe dry if water is present.
2. Inspect fork boot for rips and tears if
water is present in boot.
3. Clean, dry, and oil breather filter
element.
4. Ensure zip-ties and band clamps
are properly tightened (replace as
needed).
ZIP TIE
BOOT
ZIP TIE
CLAMP
AIR FILTER
COVER
ZIP TIE
IF THE FORK BECOMES SUBMERGED,
PERFORM THE CHECKS IMMEDIATELY.