3
133320 (10/15)
Disassembly or Modification
WARNING
DO NOT DISASSEMBLE OR MODIFY YOUR
LEFTY IN ANY WAY.
Improper service or modification can lead to serious fork
damage or serious personal injury.
• Do not disaassemble the fork.
• Do not attempt modification in any way.
• Do not drill, file, cut or remove material from any part.
• Do not attempt to repair damage.
• Do not weld, clamp, or bond anything to the fork.
• Do not attempt to remove the damping cartridge or other
internal fork parts.
The
MAINTENANCE
section of this supplement includes
information about regular owner maintenance practices that
can keep your fork in good operating condition.
All other service and maintenance procedures must be
completed through an Authorized Headshok Service Center.
Contact your Authorized Cannondale Dealer for more
information.
YOU CAN BE SEVERELY INJURED, PARALYZED
OR KILLED IN AN ACCIDENT IF YOU IGNORE
THIS WARNING.
Brakes
Tire-to-Crown Clearance
WARNING
Modification or installation of damping cartridge/spacers
other than specified; or installing over-sized tires can result in
incorrect tire-to-crown clearance
10mm
2
1
If tire clearance is less than minimum specified, the rotating tire
could come into contact with the frame causing the wheel to
stop suddenly. This can throw a rider off the bicycle or result in
a loss of control and crash.
CHECK FOR MINIMUM TIRE FORK/
FRAME CLEARANCE (10 mm) WITH ALL
AIR RELEASED FROM LEFTY AND FULLY
COMPRESSED.
Measure between the top of the properly inflated tire (1) and
the bottom of the fork steerer (2).
YOU CAN BE SEVERELY INJURED, PARALYZED
OR KILLED IN AN ACCIDENT IF YOU IGNORE
THIS WARNING.
EN
EN
WARNING
do NoT RIde WITHoUT A PRoPeRly moUNTed, AdJUSTed,
ANd fUNCTIoNING fRoNT BRAKe SySTem.
The (disc/caliper) acts as an integral secondary wheel retention
system. If the system is missing or improperly installed, or if the
wheel hub axle bolt should loosen, the front wheel could slide
off the spindle end.
Follow brake manufacturer’s instructions when mounting the
brake caliper to the spindle brake bosses. Do not modify the
fork in any way.
PleASe ASK yoUR CANNoNdAle deAleR foR HelP WHeN
INSTAllING ComPATIBle fRoNT BRAKe SySTemS.
