9
133320 (10/15)
1
2
3
EN
WHeel/HUB
Wheel Removal
1.
See Figure 1.
Use a 5 mm Allen key to loosen the
brake caliper mounting bolts enought to remove the
brake caliper from the mounting tabs.
Note brake alignment shims between brake bosses and
the caliper. Replace correctly during reinstallation.
2.
See Figure 2.
Insert a 5 mm Allen key into the axle
hub bolt and turn the the hub extraction bolt counter-
clockwise.
Continue turning the extraction bolt until the wheel can
be removed easily from the spindle end.
See Figure
3.
NOTICE
■
Make sure the axle bolt is completely disengaged
before attempting to remove the wheel. Never try
to pull the wheel off forcefully.
■
When the wheel is off, to keep dirt out, cover the
hub opening.
■
Protect spindle from damage when wheel is
removed.
