Cannondale Alloy Road Disc, Быстрый старт

Страница: 8 / 16

SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
Step 3. Install your front wheel.
Line the brake rotor up with the disc brake pads, then lift the front of
the bike and roll the wheel into the fork.
Carefully align and lower the fork onto the wheel axle. Ensure the
brake pads are in-line with the disc and the wheel axle is fully seated
in the fork dropouts.
Insert the thru-axle from the right (drivetrain) side of the bike and
tighten. When properly tightened, the lever should leave a mark on
your hand.
Ensure the thru-axle head is is aligned behind the fork leg. Holding
the end of the thru axle with your thumb, pull the thru-axle head out
to make angle adjustments without affecting the tightness of the
axle.
At this point you can remove any additional packaging from the bike.
E.
F.
G.
H.
I.
E
F
G
H